Vaisala vNet PoE Network Interface Manual de usuario

USER'S GUIDE Vaisala vNet PoE Network Interface M211700EN-A

4 VAISALABefore you start:• Obtain an IP address for each vNet Device from your ITdepartment. They should either be reserved IP addresses supplied by

vNet User’s Guide 55On the Discover Device window, scroll down the device list until you find the MAC address of the vNet Device you are installing (o

6 VAISALATo install drivers for Devices on a different subnet: Note: vNet Devices are installed with Digi Driver software (all Setup Wizard screens r

vNet User’s Guide 7Note: After the Device is installed, use the Windows Device Manager to change assigned COM port number(s). • Select the option, Wai

8 VAISALADiscover Devices The Device Discovery function ensures that all vNet Devices connected to your network are identified by viewLinc or vLog sof

vNet User’s Guide 9If the vNet Device does not appear in the list, wait a few sec-onds, then click Refresh view. Select the Device, then, in the Devic

10 VAISALAFor example:http://192.168.1.58http://VERITEQ09075101http://192.168.1.58:80002 At the login screen, enter the user name: root. 3 Enter the

vNet User’s Guide 115Click OK. The vNet Configuration and Management screen displays.Network Configuration SettingsTo view vNet Device IP settings:1La

12 VAISALANote: The vNet Device has DHCP enabled by default. If your network does not have a DHCP server, manually assign a static IP address. To manu

vNet User’s Guide 13The factory default NetBIOS name is VERITEQXXXXXXXX (X denotes the 8-digit serial number of the vNet device).To change the NetBIOS

PUBLISHED BYVaisala OyjP.O. Box 26FI-00421 HelsinkiFinlandPhone (int.): +358 9 8949 1Fax: +358 9 8949 2227Visit our Internet pages at www.vaisala.com.

14 VAISALAthe same TCP port as the serial port (managed by serial port redirector software).Loopback Test ModeEnable the Loopback Test Mode option whe

vNet User’s Guide 15Driver installation disk (this ensures that the PC only connects to the vNet device when trying to open the serial port). • When t

16 VAISALA7Check the Wait for COM open request before connecting to device checkbox, then click OK and close all open dialogs.8 Repeat these steps for

vNet User’s Guide 17and must be 4 to 16 characters long. The default administrator password is dbps.Note: The administrator name, root, cannot be chan

18 VAISALA5Click Apply. If the TCP port number was changed, a message appears stating that the vNet Device needs to be restarted. Click the here lin

vNet User’s Guide 19using the Lookup Interval and Followup Interval, on an on-going cycle.3Specify communication channel and address:•viewLinc UDP Por

20 VAISALAConnectionsTo see the Connections and Network Statistics tables:1From the vNet Configuration and Management interface, choose Management | C

vNet User’s Guide 21Network Statistics TableUse the Network Statistics table to monitor the network activity:•Accepted Rx Packets: The number of recei

22 VAISALASetting the System FanSome vNet Devices are equipped with an internal fan. This fan is provided to cool the internal electronics so they do

vNet User’s Guide 23vNet Device UtilitiesBackup/RestoreIt is recommended that you save your current vNet Device configuration settings to a backup fil

vNet User’s Guide iContentsAbout this Manual . . . . . . . . . . . . . . . . . . . . . . . iiiWho this Manual is for . . . . . . . . . . . . . . .

24 VAISALATo save configuration settings:1From the vNet Configuration and Management interface, choose Utilities | Backup/Restore.2 Select the Backup

vNet User’s Guide 253At the File Download prompt, click Save.4 Choose a location where you want to save the file and specify a file name. The default

26 VAISALA8Click Apply. • If a message appears stating that the vNet Device needs tobe restarted, click the here link to restart the Device. • If you

vNet User’s Guide 27Factory Default SettingsYou may need to restore the vNet Device configuration to factory default settings if you:• Forgot the admi

28 VAISALATo manually restore factory default settings: On the vNet Device itself, press and hold the restart button for at least five (5) seconds (s

vNet User’s Guide 29If the Keep IP Settings and Administrator Password option is unchecked, these additional items are reset to their factory default

30 VAISALAThe restart process takes approximately 15 seconds to complete. During this time the vNet Device is unavailable. The vNet Configuration and

vNet User’s Guide 31Getting HelpIf you need help, technical support is available from Vaisala, 8 am-4 pm PST Monday through Friday.In North America, p

www.vaisala.com

ii VAISALA

vNet User’s Guide iiiAbout this ManualThe Vaisala vNet Power over Ethernet Device User Guide includes the information you need to install, configure a

iv VAISALATo set up individual Loggers, refer to your Logger-specific User Guide, or Vaisala Veriteq vLog and Spectrum software online Help and User G

vNet User’s Guide 1Vaisala vNet PoE Network DeviceWelcome to the Vaisala vNet User’s Guide. This guide provides you with the information you need to i

2 VAISALAImportant: Do not drop the Device as the impact may dam-age it.To connect a Logger to a vNet Device:1Remove protective label on the bottom or

vNet User’s Guide 3the power supply barrel-end connector into the Device and turn 1/4 to the right (Figure 2). Figure 2: Connecting to an external pow