Vaisala WINDCAP WS425 Guía de usuario descargar pdf (Pagina 39)

Chapter 4 ________________________________________________________________ Operation

VAISALA _______________________________________________________________________ 39

Serial Mode Default Settings for Europe

Operation Mode: NMEA Extended

Wind Speed Units: Meters/Second

Average Interval (seconds): 3

Averaging Method: Scalar

Output Interval (seconds, 0 for polled): 1

Sensor ID Character: A

Wind Direction Coast Threshold (speed units): 0.0

Head Orientation: Up

Baud Rate: 9600b

Parity: None

Data Bits: 8

NOTE

These default settings for Europe are used for product ordering options

x2xxx (for example, WS425 A2A1A, where the number 2 refers to the

default settings).

Configuration Menu

The configuration menu can be opened by typing

Open or Open <id>

where

<id> is the identification character of the sensor.

If the sensor has been running for more than five seconds, use the

currently active baud rate and other communication settings. There is a

short timeout in typing in the characters. Therefore, type the OPEN

command followed by ENTER relatively fast.

The OPEN command displays the following menu (on the next page):

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 85 86

Sin comentarios

Vaisala WINDCAP WS425 Guía de usuario Pagina 39