Vaisala BAROCAP PTB330 Guía de usuario descargar pdf (Pagina 104)

USER'S GUIDE____________________________________________________________________

102 _________________________________________________________________ M210855EN-D

Operating Analog Output

The analog outputs are set in the factory according to the order form.

If you want to change the settings, follow these instructions. See

section Analog Output Module on page 38.

Changing Output Mode and Range

The output channel has its own DIP switch module with 8 switches,

see the position in Figure 22 on page 38 (DIP switches to select the

output mode and range). To change output mode and range:

1. Select

the current/voltage output, switch ON either of the

switches, 1 or 2.

2. Select the range, switch ON one of the switches from 3 to 7.

Figure 41 Current/Voltage Switches of Output Module

The number refers to Figure 41 above:

1 = Current/voltage selection output switches (from 1 to 2)

2 = Current/voltage range selection switches (from 3 to 7) in

analog output 1 and 2.

3 = Switch for service use only. Keep in OFF position always.

NOTE

Only one of the switches 1 or 2, must be ON at a time. Only one of

the switches 3 to 7, must be ON at a time.

1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 143 144

Sin comentarios

Vaisala BAROCAP PTB330 Guía de usuario Pagina 104