Vaisala vLog 4.5 Manual de usuario descargar pdf (Pagina 45)

Configuring Loggers

Vaisala Veriteq vLog 4.5 39

Enabling and Disabling Logger Channels

The Logger Channels option permits you to enable or disable

the channels on the currently-connected logger.

Note: During this process the logger’s memory is

cleared. If the information on the logger is still of

value, transfer the data to a PC before enabling

or disabling channels.

To enable or disable logger channels:

Select Logger | Channels.

2 In the window that appears, select or deselect the

checkbox to enable or disable a channel.

Click

OK. This initiates the process of clearing the log-

ger’s memory. To conserve logger memory it is a good

idea to disable unused channels.

Note: If you are using a temperature and humidity log-

ger, remember that the humidity sensor requires

temperature values; therefore, you cannot dis-

able the temperature sensor channel if you are

using the humidity channel.

Configuring Channels to Work with Transducers

This section applies only to those using Vaisala Veriteq VL-

4000 and SP-4000 Series Data Loggers. Used with

transducers, you can configure VL-4000 and SP-4000 Series

loggers to display measurements in units other than

milliAmps or volts.

To configure VL-4000 and SP-4000 Series Data Loggers to work

with transducers:

In vLog, choose Logger | Setup ().

2 From the Setup window, click Setup next to the channel

to configure. Different loggers offer different channel

types, each with different setup windows and slightly

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 127 128

Sin comentarios

Vaisala vLog 4.5 Manual de usuario Pagina 45