Vaisala WINDCAP WMT52 Guía de usuario descargar pdf (Pagina 68)

User’s Guide ______________________________________________________________________

66 ___________________________________________________________________M210925EN-B

Wind Data Message (aR1)

With this command you can request the wind data message.

Command format: aR1<cr><lf>

Example of the response (the parameter set is configurable):

0R1,Dn=236D,Dm=283D,Dx=031D,Sn=0.0M,Sm=1.0M,

Sx=2.2M<cr><lf>

To change the parameters and units in the response message and to

make other sensor settings, see section Wind Sensor on page 95.

where

a = Device address

R1 = Wind message query command

<cr><lf> = Command terminator

where

a = Device address

R1 = Wind message query command

Dn = Wind direction minimum (D = degrees)

Dm = Wind direction average (D = degrees)

Dx = Wind direction maximum (D = degrees)

Sn = Wind speed minimum (M = m/s)

Sm = Wind speed average (M = m/s)

Sx = Wind speed maximum (M = m/s)

<cr><lf> = Response terminator

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 142 143

Sin comentarios

Vaisala WINDCAP WMT52 Guía de usuario Pagina 68