Vaisala Humicap HMW60U Guía de usuario descargar pdf (Pagina 32)

User's Guide ______________________________________________________________________

30 __________________________________________________________________ M210297EN-E

5. Press SELECT.

6. To set the recording duration, select Duration, press SET.

7. Select the recording duration (1 min, 5 min, 15 min, 30 min, 1 h, 3

h, 12 h, 24 h, 7 d, 30 d, memory full) with arrow buttons and

press SELECT.

8. Start recording: select Start/Stop recording, press START. If you

chose 'Memory full', you see the maximum recording time on

the display. You can also delete files in order to empty the

memory. Press START again to accept maximum recording

time.

9. You can switch the HM70 off during recording to save battery.

Display message tells you that recording continues undisturbed

even when power is off. If the indicator is switched off during

recording, the progress bar is shown on the display every

10 seconds (all the time, if charger is connected). This bar shows

the amount of recorded data.

CAUTION

Do not disconnect the probe when the data recording is on,

even if the indicator is off. This may cause loss of recorded

data.

Stopping Recording

1. To stop recording press Record, select Record data and press ,

select Start/Stop recording and press STOP.

2. Now you can go and see the recorded file by selecting

SHOW.

You can save individual measurement data points with Hold/Save

function described in page 23.

Viewing Recorded Data

1. Open the MENU: press OPEN .

2. Select Recording/Viewing, press .

3. Select View recorded data, press .

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 82 83

Sin comentarios

Vaisala Humicap HMW60U Guía de usuario Pagina 32