
User's Guide _______________________________________________________________________
8 _____________________________________________________________________M210498en-A
CHAPTER 3
PREPARATIONS BEFORE USE
Installing and recharging of batteries
1. If you are using alkaline batteries, unscrew the back plate of the
indicator and insert the alkalines. If MM70 is ordered with
rechargeable battery pack, it is already in place as shipped from the
factory.
2. Recharge the battery pack as follows: Plug in recharger connector to
the base of the indicator and connect the recharger to wall socket. A
battery symbol in corner of display starts to roll.
- It is not recommended to use MM70 during the first recharging. Later
on MM70 can be used while recharging.
- Duration of recharging depends on the charge level of the battery pack
being 4 hours typical. The recommended first recharging time is 6
hours.
3. The battery pack is full when the battery symbol stops rolling.
4. Disconnect the recharger.
Turning on the device
1. Connect the probe to the either of the base connectors of the
indicator.
2. Press button.
3. Select the language by using buttons. Confirm by pressing
SELECT. You can select the language later as well, see page 23.
Comentarios a estos manuales