Vaisala HMP228 Guía de usuario descargar pdf (Pagina 22)

User's Guide _______________________________________________________________________

20 ____________________________________________________________________M210498en-A

Feeding the coefficients to the MI70

memory

You can save in the memory specific coefficients for 4 different oils. As

shipped from factory the average coefficients are set for the number 1 type

oil

: 1). Add your own coefficients as follows:

1. Open the MENU; press OPEN

2. Select SETTINGS and press .

3. Select MEASUREMENT SETTINGS and press .

4. If you want to keep the average coefficients under identification

number 1 (set in the factory) press

SET and give number 2 for the

second oil type.

5. Select the A value (A:0.0000) and press SET.

6. Set the value A by using using buttons, press OK.

7. Select the B value (B:0.0000) and press SET.

8. Set the value B by using using buttons, press OK.

9. You may give coefficients for 4 different oils. Indentify the oil by

numbering them (1...4). Select the first row (H

oil

) and set the

identification number. Then feed the coefficients as shown above.

10. Press EXIT to return to the basic display.

11. Remember always select the correct oil type before measurements.

Oil

identification

number 1-4

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 56 57

Sin comentarios

Vaisala HMP228 Guía de usuario Pagina 22