Vaisala HUMICAP MMT162 Guía de usuario descargar pdf (Pagina 31)

Chapter 4 _________________________________________________________________ Operation

VAISALA ________________________________________________________________________ 29

Set Serial Line Response Time

With the SDELAY command you can set delay (response time) of the

serial line, or view the currently set delay value.

SDELAY [delay]<cr>

where

delay

Serial line delay, range 0 ... 255. Multiply the value by four

to get milliseconds (for example, delay value of

10 equals

40 millisecond delay).

Example:

sdelay

Serial delay : 0 ? 10

sdelay

Serial delay : 10 ?

Set Transmitter Address

Addresses are required only for POLL mode (see Set Serial Interface

Mode on page 33). Use the ADDR command to input the RS-485

transmitter address.

ADDR [aaa]<cr>

where

aaa

address (0 ... 255) (default = 0)

Example (configure transmitter to address 99):

addr

Address : 2 ? 99

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 74 75

Sin comentarios

Vaisala HUMICAP MMT162 Guía de usuario Pagina 31