Vaisala HUMICAP MMT162 Guía de usuario Pagina 33

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 75
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 32
Chapter 4 _________________________________________________________________ Operation
VAISALA ________________________________________________________________________ 31
Table 6 FORM Command Modifiers
Modifier
Description
/
Restores the default output message (depends on the
device configuration). Used alone.
x.y
Length modifier (number of digits and decimal places).
parameter
Abbreviation of a measured parameter, for example aw.
Outputs the measured value of the parameter, or
* characters if measured value is not available.
U1…U7
Unit symbol in the specified number of characters
(truncated or space filled as necessary).
“xxx”
String constant (free text).
#a
\a
Audible bell character <07h>.
#b
\b
Backspace character <08h>
#f
\f
Form feed character <0Ch>.
#n
\n
Line feed character <0Ah>.
#r
\r
Carriage return character <0Dh>.
#t
\t
Horizontal tabulator character <09h>.
#v
\v
Vertical tabulator character <0Bh>.
#\
\\
Backslash character.
#0…#255
\0…\255
Data byte with the specified decimal value.
ADDR
Device address (left-filled with spaces).
CS2
Modulus-256 checksum of message sent so far,
hexadecimal format.
CS4
Modulus-65536 checksum of message sent so far,
hexadecimal format.
CSX
NMEA XOR checksum of message sent so far, hexadecimal
format
ERR
Currently active transmitter errors in a four bit field.
0 = no error, 1 = error.
bit1 = Temperature measurement (T meas error)
bit2 = Not used
bit3 = Humidity measurement (F meas error)
bit4 = Internal error (Program flash check sum error)
SN
Device serial number.
TIME
Time since transmitter startup in format hh:mm:ss.
Vista de pagina 32
1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 74 75

Comentarios a estos manuales

Sin comentarios