Vaisala HUMICAP HMT310 Guía de usuario descargar pdf (Pagina 56)

User's Guide _______________________________________________________________________

56 ___________________________________________________________________ M210619EN-E

Test Analog Outputs

Syntax: ITEST aa.aaa bb.bbb<cr>

The operation of the analog outputs is tested by forcing the outputs to

given values. The values in the analog outputs can then be measured with

a current/voltage meter.

Where

aa.aaa

Current/voltage value to be set for channel 1

bb.bbb

Current/voltage value to be set for channel 2

Example:

>itest 8.30 6.40

8.30000mA 2c30 6.40000mA 2278

The ITEST command output includes internal debugging values shown

in hexadecimal format (2c30 and 2278 in the example above).

The set values remain valid until you issue the ITEST command without

readings or reset the transmitter.

Test Analog Outputs for Desired

Readings

Syntax: AQTEST x yyy.yyy<cr>

Using the AQTEST command, you can test the analog output by forcing

the output to correspond to a chosen value.

Where

Output quantity of analog channel (use

abbreviations, see

Set Serial Output Format

on page

45)

yyy.yyy

Value

Example:

>aqtest td 30

CH1 Td : 30.0000 'C 12.00000mA

CH2 x : 2.5304 g/kg 4.08097mA

The set values remain valid until you give the command AQTEST

without a value or reset the transmitter.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 104 105

Sin comentarios

Vaisala HUMICAP HMT310 Guía de usuario Pagina 56