Vaisala HUMICAP HMT310 Guía de usuario descargar pdf (Pagina 70)

User's Guide _______________________________________________________________________

70 ___________________________________________________________________ M210619EN-E

Calibration and Adjustment Commands

Revert to Factory Calibration

Syntax: LI<cr>

This command reverts only the CRH calibration (see calibration

instructions, starting on page 73).

1. Remove the transmitter unit from the mounting plate (see

Mounting the Transmitter/Removing the Transmitter Unit on page

22) and press the adjustment button once (see Figure 18 on page

74).

2. Issue the LI command and enter value 0 for offset and value 1 for

gain.

3. Reset the transmitter by issuing the RESET command. The

transmitter returns to normal mode.

Example:

>li

RH offset : -0.6000000 ? 0

RH gain : 1.00000000 ? 1

T offset : 0.00000000 ? 0

T gain : 0.40000000 ? 1

View Current Offset and Gain Adjustment

View the currently applied standard user adjustment offset and gain using

the L command.

Syntax: L<cr>

Example:

RH offset : 0.00000000

RH gain : 1.00000000

T offset : 0.00000000

T gain : 1.00000000

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 104 105

Sin comentarios

Vaisala HUMICAP HMT310 Guía de usuario Pagina 70