
User's Guide ______________________________________________________________________
78 ___________________________________________________________________M210630EN-B
Pressure Sensor
The Pressure Sensor PMT16A is located on the CPU board of the
logger, see Figure 63 on page 78. Normally, it is factory installed on the
logger board. If necessary, it can be accessed by removing the cover of
the logger. The sensor is connected directly into the connector on the
board and is fixed on it with one screw.
0201-033
Figure 63 PMT16A Location on the Logger
CAUTION
When handling the sensor, take care not to bent any components on the
transducer board.
CAUTION
Beware of electrostatic discharge when touching objects inside the
logger housing.
CAUTION
Make sure that the vent tube of the pressure sensor is not blocked or
bent during transportation.
Comentarios a estos manuales