Vaisala WMS302 Guía de usuario descargar pdf (Pagina 86)

User's Guide ______________________________________________________________________

84 ___________________________________________________________________M210630EN-B

3. It is important to ensure that the rim of the rain gauge is leveled

precisely. Failure to do this will result in a systematic error. Use a

spirit level (1) and adjust with the fixing screws (3). See Figure 71

on page 83.

4. The cable length can be shortened or lengthened as required. If the

cable is lengthened, please ensure a good quality environmental

connector, or a heatshrink joint (see Figure 72 on page 84).

Extension cables used must be of a similar specification.

9902-004

Figure 72 Wiring Diagram of QMR102

Pyranometers

The pyranometer can be installed on the sensor arm as follows:

1. Attach the pyranometer (2) to the sensor arm (1) using the bolts (3)

provided. For the explanation of the numbers, see Figure 73 on

page 84.

0201-038

Figure 73 Installing Pyranometer on Sensor Arm

NOTE

When using QMR102, the shield must be connected to the ground.

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 261 262

Sin comentarios

Vaisala WMS302 Guía de usuario Pagina 86