Vaisala WMS302 Guía de usuario Pagina 83

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 262
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 82
Chapter 4 _______________________________________________________________ Installation
VAISALA_______________________________________________________________________ 81
0002-010
Figure 67 Rain Gauge Attachment
3. Connect the grounding cable (2).
4. Connect the signal cable (4) to a data logger.
5. Continue from section Finalizing the Installation on page 83.
Installing on the Base Plate RGB1
1. Use the base plate RGB1 as instructed in the provided data sheet.
2. Connect the signal cable to a data logger.
3. Continue from section Finalizing the Installation on page 83.
NOTE
The base plate may be mounted to hard surfaces like concrete by
replacing the pegs with screws and rawl plugs. For temporary
mounting on hard surfaces use heavy weights on the four corners of the
base plate. The height of the weights should be kept as low as possible
to cause the minimum interference with the aerodynamics of the rain
gauge.
Vista de pagina 82
1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 261 262

Comentarios a estos manuales

Sin comentarios